What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 04:48
Upvotes:
There are three different concepts here that are getting confused.
What does a fuse do?
How old is planet Earth? Is it 4.5 billion years old or 6,000 years old?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This one hit behind the barn.
How to Build Conscious Machines - Hacker News
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Main Card Results | UFC 316: Dvalishvili vs O'Malley 2 - UFC.com
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
How can consumers verify the power claims of light therapy devices?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It seems Mohan does not understand the difference between a comment and an Answer.
Florence gallery says portrait damaged by visitor taking a selfie - BBC
The MOV will conduct when the voltage exceeds 50% of line voltage.
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
When was the last time you had sex with someone much older than yourself?
For this case there are devices called Metal oxide varistors (MOV).
What is lightning?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What is a good comeback for when someone calls you flat?
The bolt then partially travels down the line to your home.
(Dc diagram shown, AC is similar).
eight
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
but I think this circuit , shows a few more pieces.
There are two important concepts here.
The other is “what does a “fuse” do?”
It also is a device that limits the change in current flow.
An AC voltage/ current source, and an ac inductive load.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–10[John johnson John Johnson ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
These are simplified answers to the original question, and does not change anything I wrote above.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One is “what exactly is in a ‘surge protector’ ? ”
He then asserts :
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
a photo is worth a thousand words.
These devices are installed between the “hot” and “neutral” and protective ground.
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then describes the function of a fuse.
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
Edit 2024–10.
I post the exact comment here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
[image of Common-mode choke]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
nine
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is where the MOV conducts again, and dissipated the energy.
First Sentence:
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
In schematic diagrams this is the symbol for a fuse:
Here is a simplified AC power diagram.
But it can get overloaded, and no longer works.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
At one ohm, the resistor has a maximum of 1 watt power.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
One
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
Barnstars:
He then describes Rainy Season and Lightning.
So, the voltage could go up to 500 volts, and the fuse will not open up.